Kolibri KCD-1000 Скачать руководство пользователя

Страница: 1 / 3

2019 Kolibri USA

KB-062019

Cleaning Procedure

KCD-1000

Dirty sensors can affect the KCD-1000 performance and cause genuine bills to be rejected. It is suggested that

the user performs weekly maintenance on the unit to maintain top performance.

Items Needed

- Soft microfiber cloth

- Soft-bristled brush

- Can of compressed air

- Isopropyl alcohol

Steps

1. First, make sure the unit is turned off and unplugged

2. Perform the cleaning of each sensor, one step at a time (a to c), and check after each step if this

resolves the issue. If it does not, proceed to the next cleaning step

a. Wipe away dust with a soft microfiber cloth or a soft-bristled brush

b. Clean the sensors using a can of compressed air

c. Clean the sensors with a cotton swab

lightly

moistened with isopropyl alcohol – gently wipe

the sensors with the swab

Refer to the photos below showing the location of the KCD-1000 sensors. For each sensor, follow the steps as

described above.

Sensors Locations

Overview:

1. UV Sensor

2. IR Sensors

3. Magnetic Sensors

4. Start Sensor

Содержание KCD-1000

Страница 1: ...e cleaning of each sensor one step at a time a to c and check after each step if this resolves the issue If it does not proceed to the next cleaning step a Wipe away dust with a soft microfiber cloth...

Страница 2: ...Procedure Infrared IR Sensor Locate the small square sensor on the upper part of the bill track as shown below Ultraviolet UV Sensor Locate the 4 part UV sensors as shown below These pairs of sensors...

Страница 3: ...2 rollers Note Several factors can cause a KCD 1000 to not recognize a genuine bill Overly wrinkled overly creased and overly worn bills Dropping the unit or bumping into the unit during use A harsh...