Koldwave 5AK39BFA, Инструкция по установке, эксплуатации и обслуживанию, Страница: 16 / 32

16
display is always On. If self-recovery mode
is not enabled, then the second decimal point
is always Off. However, the user is able to
enable the “Self Recovery Mode” by
depressing the OFF button for 5 seconds and
then adjust the setting from the arrow key.
A0 – Self Recovery Mode “off “
A1 – Self Recovery Mode “on” (Factory
Default Setting)
Check Alarms:
The controller will monitor and check the
status of two alarm signals:
1. Condensate Pump Alarm (E.F),
2. Alarm_Temperature_Sensor (E.S).
When
E.F , or E.S alarm is present, the
Power LED will blink, signaling that the
alarm condition is present, and the unit will
lock out. Once the failure is cleared, press
the OFF button, the Power LED will stop
blinking, and room temperature will display.
Optional Remote Control:
The optional remote control has the identical
function as the main unit excluding the
followings:
1. Ability to change the “temperature
differential” setting. User can only
adjust such setting through the main
unit panel.
2.
Ability to enable or disable the “self
recovery mode” setting. User can
only adjust such setting through the
main unit panel.
* User is only allowed to change setting
when unit is OFF*
Unit Control Panel
Optional Remote Control