5
OPERATION
INSTALLATION CHECKLIST BEFORE OPERATION
1. Have all packing materials and tape been removed from the
interior and exterior of the wine cooler?
2. Have the installation instructions been followed, including
connecting the machine to electricity? And has proper grounding
been installed for the wine cooler?
3. Has the machine been leveled?
4. Is the wine cooler in a site where the ambient temperature is
between 60 and 85ºF all year round?
5. Is there a clearance of at least 5
” at the rear, 4” at the top and
4
” at the sides for proper air circulation?
ADJUSTING THE TEMPERATURE
Front panel controls
Display
Up
Down
Light
Notes: Allow at least 24
hours before storing your
wines and to allow the
temperature to acclimate.
Radio devices may interfere
with the touch sensitive
controls and cause the
temperature settings to
change. Move radio devices
away from the wine cooler.
This wine cooler features a touch-sensitive control panel. You may
adjust the temperature of the wine cooler using the front panel
controls. The display temperature is in Fahrenheit. The wine cooler
has a temperature range from 46°F to 66°F. Whether your wine
cooler can reach the actual set temperature depends on the
ambient environmental conditions.
Adjusting the temperature:
Press the
and
buttons on the control panel to increase and
lower the temperature, respectively. The set temperature will
flash for a few seconds, and then the display will revert to the
ambient inner temperature of the wine cooler.
Press the
button to turn on and off the inner LED lights.
