9
Misting Drain
Your unit also includes the unique misting drain option. If a drain is not present this option will
allow the unit to remove the excess moisture out of the exhaust hose through a mist nozzle. The
mist nozzle MUST be setup in the exhaust hose and NOT the intake hose. In order to run the
misting drain option you will need to do the following:
1.
Connect the included water line to the unit. You will need to attach the quick connect adapter
on the end of the water line to the back of the unit.
2.
Run the remaining water line into the exhaust hose through the opening in the exhaust hose
adapter. This adapter MUST be installed on the exhaust outlet of the unit. If the adapter is not
installed in this position you will need to adjust the adapters. Run the excess water line into
the cavity of the exhaust hose.
3.
Connect the mist nozzle to the end of the water line. Ensure the water line is attached
securely to the mist nozzle.
Note: The water line quick connect includes a trigger to let the unit know a water line is attached. The unit
will not pump water out of this drainage hole unless the quick connect water line is attached.
Caution: The water line will contain some water if the pump has been in use. If you are going to detach the
water line from the unit be sure to keep the end of the water line elevated once it is detached to avoid
water spilling. Drain the remaining water in the water line if you are preparing for storage of the unit.
