Cleaning procedure
1.Routine cleaning will preserve the corrosion resistance and the
appearance of the
stainless steel for many years.
2. Put in new active carbon granules, mount the active carbon unit
back in the range hood.
3. Clean the stainless steel as often as necessary (i.e. when it is
noticeably dull
or dirty) and use the simplest cleaning method that will effectively
do the job.
4.Use clean water, or a mild detergent solution applied with a soft
cloth or sponge. rinse well and wipe dry.
5. Always wipe in the direction of the brushed texture on the
stainless steel.
6. Periodically apply a fine film of dedicated stainless steel cleaner
or baby oil
to the canopy of the extractor hood to add lustre and sparkle to the
steel.
Owner’s responsibility
NOTE: Since the following are not factory faults, they are the
owner’s responsibility.
1.Damage to exterior finish.
2.Breakage of glass and other components
3.Replacement of the light bulbs
4.Damage through improper use or installation
Trouble shooting
Fault
Cause
Solution
Light on, but motor
does not work
The leaf blocked
Get rid of the
blocking
The capacitor damaged
Replace capacitor
The motor jammed bearing
damaged
Replace motor
The internal with of motor
off or a bad smell from the
motor
Replace motor
Beside the above mentioned, check the following:
