Koki Holdings Hikoki RP3608DA(L), Инструкция по эксплуатации

Страница: 15 / 32

15
English
Table 3
Safeguard Function LED Light Display Corrective Action
Overload Protection
On 0.1 second/o ff 0.1 second
Remove the cause of the overloading.
Temperature Protection
On 0.5 second/o ff 0.5 second
Allow the tool and battery to thoroughly cool.
CAUTION
When using a paper fi lter, avoid sucking in liquids such
as water or wet dust, as this may lead to tearing of the
fi lter.
(1) Open the paper fi lter horizontally so that the suction
hole in the paper fi lter is over the top of the tank.
(2) Before attaching the fi lter to the appliance, bend the
two folds in the cardboard approx. 90° in the direction
of the arrow.
(3) Match the suction hole in the paper fi lter with the
suction opening of the appliance. Insert the fi lter in
the direction of the arrow as shown in the illustration,
so that the cardboard of the paper fi lter goes past the
stopper on the suction opening.
FLOAT MECHANISM
This appliance is equipped with a fl oat mechanism to
prevent water from entering in the motor when it sucks
in more than a speci fi c quantity of water. When the fl oat
operates not to suck in water, turn o ff the switch promptly
and throw away water in the tank.
WARNING
○ With the fl oat working, do not continue operation.
Otherwise the temperature of the motor may rise
abnormally causing troubles such as deformation of
parts or motor burnout.
○ Avoid sucking in foaming liquid such as detergent or
foams. Before the fl oat works, foams may spurt from
the air outlet. If you continue to use the appliance as it
is, it will lead to electric shock or failure.
ABOUT REMAINING BATTERY
INDICATOR
Remaining battery power can be veri fi ed with either the
battery or with the cleaner itself. ( Fig. 19 )
NOTE
○ The reading for the remaining battery power may di ff er
on the battery from that of the cleaner.
○ Use the remaining batter power as a guideline since
the readings may somewhat di ff er due to surrounding
temperature or battery feature.
LED LIGHT WARNING SIGNALS
(Fig. 20)
This product features functions that are designed to protect
the tool itself as well as the battery. If any of the safeguard
functions activate during operation, the mode display
lamp indicates this by blinking for about 30 seconds as
described in Table 3 .
In this case, follow the instructions described under
corrective action.
Mode display
lamp
Fig. 20
MAINTENANCE AND INSPECTION
WARNING
○ For inspection and maintenance, be sure to turn o ff the
vacuum switch and disconnect the battery.
○ Do not work with wet hands. May cause electric shock
or injuries.
1. Maintenance of fi lter
NOTE
○ Since a cloth/water fi lter is a consumable, we
recommend you to prepare spares.
○ The cloth fi lter should simply be tapped even if it is
considerably clogged. Strong brushing will shorten its
life.
○ Do not hurl a cloth/water fi lter. May break its resin part.
A clogged cloth/water fi lter will decrease the suction
power remarkably. Tap the inner side of the cloth/water
fi lter to drop o ff dusts regularly.
2. Inspecting the mounting screws
Regularly inspect all mounting screws and ensure that
they are properly tightened. Should any of the screws
be loose, retighten them immediately. Failure to do so
could result in serious hazard.
3. Maintenance of the motor
The motor unit winding is the very “heart” of the power
tool.
Exercise due care to ensure the winding does not
become damaged and/or wet with oil or water.
4. Inspection of terminals (tool and battery)
Check to make sure that swarf and dust have not
collected on the terminals.
On occasion check prior, during and after operation.
CAUTION
Remove any swarf or dust which may have collected on
the terminals.
Failure to do so may result in malfunction.
5. Check for Dust
Dust may be removed with a soft cloth or a cloth
dampened with soapy water. Do not use bleach,
chlorine, gasoline or thinner, for they may damage the
plastics.
00Book̲RP3608DA(L)̲Cht.indb 15 00Book̲RP3608DA(L)̲Cht.indb 15 2021/03/18 15:01:58 2021/03/18 15:01:58