8
Tips: Replacing the Filament
1.Cut off the filament near the entrance of
the extruder hole, then insert new
filament until the above result.
2.Preheat the nozzle and pull out the
filament immediately, then insert new
filament.
6. Loading Filament
1. preheat
2. Feeding
Method 1
：
Method 2
：
1. Press and hold the extruder
2. Insert filament through detection
switch(lamp on), extruder(gear & roller),
white tube and to the end until being
stopped.
3. Filament comes out of heated nozzle after
printing starts
4. There is tips on LCD display for shortage
