Kohlt KPEX 10A, Руководство пользователя

Страница: 7 / 20

7 6
Connection Plate
ENG ENG
Connection Plate
For Active Full Range Speaker Sytem
1) Connect one side of the signal cable at your audio mixer into output left / right (with Stereo-Jack or XLR) and
the other side of the cable into the line input Stereo-Jack) of your active speaker cabinet.
2) Connect the power cord to mains.
3) Turn on your mixer first, then the active speaker cabinets.
4) Turn up the volume control of the active speaker cabinets.
5) Use PFL function to get the proper input level for the mixer, and adjust the main mix level control to
manipulate the output level.
6) After using, turn off your active speaker cabinets first, then the mixer.
Make all initial connections with all the equipments powered off, and ensure that all the
main volume controls are turned completely down.
Two Active Subwoofers & Two Active Satellite Speakers
1) Connect one side of the signal cable at your mixer into the Output Left/ Right and the other side of the cable
into the Line Input of your active su bwoofers.
2) Connect one side of another signal cable at your active subwoofers into Link Left/ Right or Out Left/ Right,
and the other side of the cable into the Line Input Left/ Right of your active satellite speakers.
* If you connect into Out Left/ Right and press Bypass switch, the 80Hz HPFwill be activated.
3) Connect the power cord to main.
4) Turn ON your mixer first, then the active speaker cabinets.
5) Turn up the volume control of the active speaker cabinets.
6) Use PFL function to get the proper input level for the mixer, and adjust the Main Mix Level control to reach
the desired output level.
7) After use, turn off your active speaker cabinets first, then the mixer.
Make all initial connections with all the equipments powered off, and ensure that all the
main volume controls are turned completely down.