CABINETRY ROUGH-IN
UNIT : mm
Reference Value
420
495
890
590
495
420
-2-
PLUMBING INSTALLATION
(a) Install the services. Hot and Cold inlets must be connected
to the correct inlet pipes.
(b) Install the waste in accordance with the manufacturers
instructions together with the overflow kit as shown
in Fig. 1.
Recommended:
Kohler Click-Up DN32 Waste (7119A-*)
Kohler reserves the right to change marked dimensions without prior notice.
NOTE: The hot and cold water supplies must be installed with
isolating valves.
Caution!
Make sure a watertight seal exists
on all drain connections.
Caution!
Provide access to the plumbing connections
for future plumbing maintenance.
DN32 to DN40
adapter
Overflow
Waste
Fig. 1
