No change in measurements if connected with drain illustrated. (K-37386)
Recommended Faucet Hole Location
4"
(102 mm)
4"
(102 mm)
Recommended Faucet Location
Lumbar
Angle 19°
30-5/16" (770 mm)
18-1/4"
(464 mm)
25-5/8"
(651 mm)
3-3/8"
(86 mm)
34-11/16" (881 mm)
4"
(102 mm)
26-1/2"
(673 mm)
60-9/16" (1538 mm)
17-5/8"
(448 mm)
14-1/4" (362 mm)
45-13/16" (1164 mm)
5-3/4"
(146 mm)
3/4"
(19 mm)
8-3/8"
(213 mm)
2-3/4"
(70 mm)
Notes
Required Electrical Service
Measure your actual product for rough-in details.
Two dedicated circuits required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI). Outside North America,
this device may be known as a Residual Current Device (RCD).
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
120 V, 15 A, 60 Hz
Blower:
120 V, 15 A, 60 Hz
Heater:
Technical Information
If installing a rim-mount faucet, make sure there
is no interference above or below the deck before
drilling any holes.
All product dimensions are nominal.
Freestanding
Installation:
Center
Drain location:
39-5/8" x 23-5/8" (1006 mm x 599 mm)
Basin area, bottom:
49-9/16" x 25-1/2" (1259 mm x 648 mm)
Basin area, top:
170 lbs (77.1 kg)
Weight:
50 lbs/ft² (244.1 kg/m²)
Minimum floor load:
16" (406 mm)
Water depth:
60 gal (227.1 L)
Water capacity:
Footprint, 1364288, not required, not
included
Template:
Blower: 120 V, 10 A, 50 Hz
Heater: 120 V, 5 A, 60 Hz
Electrical component
rating:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to
.
1-6-2020 05:50 - US/CA
Sunstruck
®
freestanding Heated BubbleMassage
™
air bath
K-24009-GH
