
3
2
1
3
2
1
Half Flush Button
Air Hose
Faceplate
Full Flush Button
2)
.
2)
Connect air hose to faceplate from water tank
3)
3)
Insert faceplate into faceplate fixed frame with half flush
upward. Installation is completed.
4) It is ready to use when connected to water supply after
installation.
Reserve access panel at front of the tank in remote
installation.
4)
5)
5)
How to remove.
Push Up
Pull Out
Pull Out
Installation For In-wall Tank Without Frame
A. Installation of In-wall Tank
A.
1. Remove in-wall tank from packing box. Remove front cover
board or top cover board inside water tank first as shown.
Then remove support block and plug above bracket
assembly.
1.
Cover,Top
Cover,Front
Plug
Cover,Top
Cover,Front
Supporting Board
-15-
1288818-T01-B