background image

   

                                                                          

1230970-2A-D            

                                                                                                                                        2   

  

   

                                                                          

1230970-2A-D            

                                                                                                                                        3  

  

INSTALLATION CHECKOUT

CLEANING INSTRUCTIONS

All Finishes: Clean the finish with mild soap and warm water. Wipe entire surface completely dry with clean soft 

cloth. Many cleaners may contain chemicals, such as ammonia, chlorine, toilet cleaner etc, which could adversely 

affect the finish and are not recommended for cleaning.

Do not use abrasive cleaners or solvents on Kohler faucets and fittings. 

INSTALLATION

How to Install the Faucet

Slide the o-ring(1) into the groove of the bottom of the body(2). Put the 

hoses and the shank(3) into the mounting hole of the sink. Let the bottom 

of the body against the deck.

Screw two screws(4) into the threaded ring(5). From underside of the 

sink, place the metal washer(6) and the threaded ring with two screws 

onto the shank. Position the faucet so that the hose(7) is on the left, the 

spray hose and two hoses(8) are symmetrical. Tighten two screws(4) to 

secure faucet to sink.

Attach the hoses to water supplies. When facing the faucet, the hose in 

front connects to hot water, the back hose with ‘COLD’ label connects to 

cold water.

Put the weight(10) and clip(11) onto the hose(7). Adjust the weight so 

that the distance is right from the bottom of the faucet to the weight. 

Insert the hose(7) into the connector(9).

Ensure that all coupling nuts are tight. Ensure that the lever handle is in 

the off position. 

Turn on the main water supply and drain, and check for leaks. Repair as 

needed.

Remove the spray(12). Remove the aerator(14) with the key(13). Turn on 

the faucet. Run hot and cold water about a minute to remove any debris. 

Remove any debris from the filter washer and aerator. Shut off the faucet. 

Reinstall the aerator and spray.

How to Use Spray

Open the handle, if you want to use the spray by hand, take the spray 

and pull out the hose.

Press the button(A) as shown for figure(a) form of water flow.  Press the 

button(B) as shown for figure(b) form of water flow, press the button(B) 

again for the water close.

NOTE: 

Please pull it gently and do not draw out the spray hose too long, 

or you may damage the hose and connector.

12

13

14

B

A

b

a

8

2

1

6

5

4

7

9

10

11

3

"LEAD FREE" is marked on the back of the faucet signifying its compliance with the United States AB1953

Отзывы: