All information is based on the latest product information available at the time of publication. Kohler Co.
reserves the right to make changes in product characteristics, packaging, or availability at any time without
notice.
Please leave these instructions for the consumer. They contain important information.
NOTES:
1. The installer must provide a G1/2” male supply fitting, protruding 35-50mm out from the face of the
finished wall.
2. Flush the water supply pipes thoroughly to remove any debris.
3. Inspect the supply pipes for damage. Replace as necessary.
4. Observe local plumbing codes.
5.
Check for leaks before covering the pipes, repair as needed.
6. All installations should comply with the relevant requirements of AS/NZS 3500.
BEFORE YOU BEGIN
ROUGH-IN DIMENSIONS
1
1221392-AN2-A 27/05/2016
Bath Spout - Wall Mount
PURIST
BATH TAPWARE
Bath spout - Wall mount: 14426A
INSTALLATION INSTRUCTIONS
G1/2˝
204
Ø102
Ø32
Fringe of bath
162
