-4-
IMPORTANT CONSUMER INFORMATION
IMPORTANT CONSUMER INFORMATION
CARE AND CLEANING
To keep your lavatory looking new, make sure you rinse it out
thoroughly after each use.
on this
product, as they will scratch and ruin the surface. Stubborn
stains, paint, or tar can be removed with turpentine or paint
thinner.
DO NOT USE ABRASIVES
Caution! Risk of product damage.
Many cleaners contain abrasive and chemical substances,
and should not be used for cleaning stainless steel, enamel,
plated or plastic fittings.
These finishes should be cleaned using a mild washing up
detergent or soap solution, rinsed and then wiped dry with a
soft clean cloth.
1.
1288760-0
4
2.
3.
4.
Install the Plumbing
1. Install drain 1288760-0 according to the manufacturer's
instructions. The two overflow pipes shall be fixed onto the
outlet valve. Fix the overflow head assembly vertically onto
the faucet supply pipe with plastic tie, as shown in Fig.4.
The overflow pipes can be fixed on either the right side or
the left side of the supply pipe and shall not interfere with
the lift rod. The height of the overflow head assembly will
affect the overflow level and can be adjusted if necessary.
please
lower the height of the overflow head.
Make sure a watertight seal exists on all
basin drain connections.
Provide access to the plumbing connections
for future plumbing maintenance.
2. Connect the hot and cold water supplies.
3. Open the hot and cold water valves, and check the supply
connections for leaks.
4. Run water into the basin, and check the drain connections
for leaks.
Caution!
Caution!
If the water level is too high to affect the overflow,
Fig.#4
4
Lift rod
Plastic Tie
Faucet Supply Pipe
Overflow Head Assembly
Overflow Pipe
Outlet Valve
1269083-T01-B
