8
11.
Fit the compression nuts and olives onto the
pipework.
12.
Align the mixer with the pipework and fit onto
the backplate.
Important!
Make sure that the hot and cold
inlets on the mixer correspond with the hot and
cold inlet supplies.
13.
Tighten the compression nuts onto the mixer
with a suitable spanner.
Caution!
Take care not to damage the chrome
surfaces.
14.
Tighten the grubscrews to secure the mixer to
the backplate.
Olive
Compression Nut
15.
Fit the spacer and shelf onto the mixer. Use
a spirit level to make sure that the shelf is
level and tighten the fixing bolt using a 4 mm
hexagonal key (supplied).
Caution!
Do not overtighten.
Fixing Bolt
Spacer
Shelf
16.
Fit the shower fittings, refer to your shower
fittings installation and user guide for
instructions.
Note!
For user comfort on high pressure
systems, a 12 litre/minute flow regulator
(supplied) can be fitted inside the outlet nipple.
Make sure that the flow regulator is fitted
correctly (refer to illustration).
Flow Regulator
17.
Turn on the hot and cold water supplies and
check for leaks.
18.
Before using the shower, refer to section:
‘Commissioning’
.
