2
1329775-W9-A
Installation of the Bar Valve Fast Fix Kit
1.
Installation of this product must be carried out in accordance with these
instructions by qualified, competent personnel.
2.
The plumbing installation must comply with all national or local water regulations
and all relevant building regulations, or any particular regulation or practice
specified by the local water supply company.
4
3
2
11
8 mm
25 mm
25 mm
Wall Bracket
HOT
COLD
Make sure that the pipework has been
installed correctly and that it protrudes
25 mm from the finished wall surface.
Hold the wall bracket in position and
mark the position of the fixing holes.
Drill the fixing holes using an 8 mm diameter
drill.
Fit the plastic pipe guide over the inlet
pipes. Level the pipe guide and secure
to the wall to hold in position.
Leave the
guide in place and finish the wall.
Plastic Pipe
Guide
150 mm
HOT
COLD
