1243009-2A-A
4
How To Install The Bonnet
Position the escutcheon(4), if included, onto the bonnet(6).
Slide the bonnet onto the bracket(2). Orient the setscrew hole of the bonnet
downward. Make sure the bonnet pin(5) engage the indexing hole in the back
of the escutcheon, if applicable. Insert a screw(7) into the bonnet and tighten.
NOTE:
Make sure the bonnet pin engage into the escutcheon hole.
5
2
4
6
7
1243009-2A-A
5
9
6
6
8
8
36
35
9
8
38
40
37
6
39
9
6
6
8
8
41
42
43
How To Install The Toilet Brush Holder
Slide the shaft of the cylinder head(39) of the toilet brush holder kit(38) into the
bonnet(6), orient the cylinder head with the detent facing downward. Tighten the
screw(8) into the bonnet with the hex wrench(9) to secure the toilet brush holder
kit.
Slide the glass holder(40) into the toilet brush holder, then slide the brush (37)
into the glass holder. If necessary, disassemble brush from the toilet brush
holder, then reinstall the brush to the brush holder.
How To Install The Double Towel Shelf
Slide the shaft of the cylinder head(35) of the double towel shelf kit(36) into the
bonnet(6), orient the cylinder head with the detent facing downward. Tighten the
screw(8) into the bonnet with the hex wrench(9) to secure the double towel shelf
kit.
How To Install The Double Towel Bar
Slide the shaft of the cylinder head(42)(43) of the double towel bar kit(41) into
the bonnet(6), orient the cylinder head with the detent facing downward. Tighten
the screw(8) into the bonnet with the hex wrench(9) to secure the double towel
bar kit.
Ensure that all connections are tightened.
Ensure all setscrews face straight down.
INSTALLATION CHECKOUT
All Finishes: Clean the finish with mild soap and warm water. Wipe entire surface completely dry with a clean soft
cloth. Many cleaners may contain chemicals, such as ammonia, chlorine, toilet cleaner etc. Which could adversely
affect the finish and are not recommended for cleaning.
Do not use abrasive cleaners or solvents on Kohler faucets and fittings.
CLEANING INSTRUCTIONS
10
12
6
8
11
8
6
13
9
14
9
6
16
15
8
8
21
17
18
18
19
9
20
23
6
8
24
9
22
9
6
8
25
23
23
6
28
29
27
8
9
8
8
9
6
8
30
31
26
32
How To Install The Covered Toilet Paper Holder
Slide the shaft of the cylinder head(33) of the toilet paper holder kit(34) into the
bonnet(6), orient the cylinder head with the detent facing downward. Tighten the
screw(8) into the bonnet with the hex wrench(9) to secure the toilet paper holder
kit.
6
34
9
33
8
How To Install The Towel Bar
Slide the shaft of the cylinder head(11)(12) of the towel bar kit(10) into the
bonnet(6), orient the cylinder head with the detent facing downward. Tighten the
screw(8) into the bonnet with the hex wrench(9) to secure the towel bar kit.
How To Install The Towel Ring
Slide the shaft of the cylinder head(14) of the towel ring kit(13) into the
bonnet(6), orient the cylinder head with the detent facing downward. Tighten the
screw(8) into the bonnet with the hex wrench(9) to secure the towel ring kit.
How To Install The Glass Shelf
Slide the shaft of the cylinder head(16)(17) of the shelf kit(15)(21) into the
bonnet(6), ensure the brackets are horizontal and two cylinder heads with the
detent facing downward. Tighten the screw(8) into the bonnet with the hex
wrench(9) to secure the shelf kit.
Slide the shelf(19) through the slot on the bracket. Ensure the shelf is in the
center of the slot on the bracket and horizontal. Tighten the setscrew(18) with
the hex wrench(9).
How To Install The TP Holder
Slide the shaft of the cylinder head(22) of the tissue holder kit(24) into the
bonnet(6), orient the cylinder head with the detent facing downward. Tighten the
screw(8) into the bonnet with the hex wrench(9) to secure the tissue holder kit.
Disassemble the tissue spindle(23) from the tissue holder kit(24) as required,
insert roll paper and assemble it back to the tissue holder kit.
How To Install The Robe Hook
Slide the shaft of the cylinder head(26) of the robe hook kit(25) into the bonnet(6),
orient the cylinder head with the detent facing downward. Tighten the screw(8)
into the bonnet with the hex wrench(9) to secure the robe hook kit.
How To Install The Dual TP Holder
Slide the shaft of the cylinder head of the tissue holder kit(27)(28)(29) into the
bonnet(6), orient the cylinder head with the detent facing downward. Tighten the
screw(8) into the bonnet with the hex wrench(9) to secure the dual tissue holder
kit. Disassemble the tissue spindle(23) from the tissue holder kit as required,
insert roll paper and assemble it back to the dual tissue holder kit.
How To Install The Soap Dish
Slide the shaft of the cylinder head(32) of the soap dish kit(30) into the
bonnet(6), orient the cylinder head with the detent facing downward. Tighten the
screw(8) into the bonnet with the hex wrench(9) to secure the soap dish kit.
Insert the dish(31).
