Kohler KDI 1903 TC Скачать руководство пользователя страница 46

Страница: 46 / 64

INFORMATION

ABOUT MAINTENANCE

5.16

Unused machine

If the machine is not used for a certain amount of time, follow the operations below:

5.16.1 Operations for the engine

POINT

OPERATION

Unused machine

up to 2 months

•

The place must be dry and fresh throughout the period in which
the machine is not used.

•

Consult the machine’s manual to disconnect the battery (before
disconnecting the battery, wait for minimum 5 mins after
turning off the engine).

•

Make sure the engine is not exposed to direct sunlight.

•

Make sure the engine is not near any heat sources.

Starting

•

Before starting the engine, check Par. 5.2 for maintenance
operations.

•

Consult the machine’s manual to connect the battery and start
the engine.

Unused machine

from 2 to 9 months

•

Perform the operations related to unused machine described in
point 1.

•

Perform the operations described in Par. 5.6.

•

Start the engine at least every 4 months as per operations
described in point 1: Avoid sudden accelerations for the first
few minutes.

Bring the engine to the working temperature by pressing the

accelerator 3/4 from MAX.

Leave the engine running at minimum speed for a few minutes and

turning off the engine.

Starting

•

Before starting the engine, check Par. 5.2 for maintenance
operations.

•

Consult the machine’s manual to connect the battery and start
the engine.

•

Avoid sudden accelerations for the first few minutes.

Unused machine

over 9 months

•

Perform the operations related to unused machine described in
point 1 and 2.

Starting

•

Before starting the engine, check Par. 5.2 for maintenance
operations.

•

Check the quality of coolant from the relative testing strips.

•

Consult the machine’s manual to connect the battery and start
the engine.

•

Avoid sudden accelerations for the first few minutes.

Содержание KDI 1903 TC

































































Результаты поиска

Содержание KDI 1903 TC

Отзывы:

Похожие инструкции для KDI 1903 TC

Бренды по названию

Популярные бренды

Kohler KDI 1903 TC, Руководство пользователя

Результаты поиска

Содержание KDI 1903 TC

Отзывы:

Похожие инструкции для KDI 1903 TC

Бренды по названию

Популярные бренды