Kohler KD36V16 Скачать руководство пользователя страница 33

Страница: 33 / 110

3 Handling, operation

3.1 Start-up procedure

3.1.1 Filling the operating fluids

Fill the following operating fluids before the initial commissioning:

–

Diesel engine oil

For suitable lubricating oil for the Diesel engine, see the chapter “Lubricants and
operating fluids”.

–

Coolant

For coolant composition, see the chapter “Lubricants and operating fluids”.

–

Diesel fuel

Diesel fuels must comply with the approved fuel specifications, see the chapter
“Lubricants and operating fluids”.

After filling the operating fluids, perform the following work:

Vent fuel system. Please refer to the generator sets' operating manual.

3.1.2 Starting the engine

Prerequisites:

The oil level is OK

Engine is filled with coolant

Charge air is connected

Exhaust system is connected

Electrical power supply is ready

Fuel supply is connected

WARNING

Unexpected movement of the equipment.
Can cause serious injuries or the death of persons.

There may be no persons in the safety zones of the diesel engine.

Bring all of the protective devices into their protective position (housing is
closed), if equipped.

Secure external parts against unexpected movements. Remove all persons
from the danger zones.

Information

Engine damage due to inadequate lubrication.

The oil pressure has to build up immediately after the diesel engine is started
(oil-pressure warning lamp goes out).

KD36V16 33521029701_1_1 en 2018-08-01

Содержание KD36V16










































































































Результаты поиска

Содержание KD36V16

Отзывы:

Похожие инструкции для KD36V16

Бренды по названию

Популярные бренды

Kohler KD36V16, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание KD36V16

Отзывы:

Похожие инструкции для KD36V16

Бренды по названию

Популярные бренды