Kohler KD36V16 Скачать руководство пользователя страница 21

Страница: 21 / 110

2 Safety

2.1 Identification of the warnings

This is a warning sign. It warns you of the risk of possible injury.
Follow all of the instructions that accompany this warning sign to
avoid any injuries or death.

Tab. 6

This warning sign only appears in conjunction with the signal words:

DANGER
WARNING
CAUTION

DANGER

indicates a hazardous situation which, if not
avoided, will result in death or serious injury.

WARNING

indicates a hazardous situation which, if not
avoided, could result in death or serious injury.

CAUTION

indicates a hazardous situation which, if not
avoided, could result in minor or moderate injury.

NOTICE

indicates a hazardous situation which, if not
avoided, could result in material damages.

Tab. 7

Additional markings

Information

indicates useful information and tips.

Tab. 8

KD36V16 33521029701_1_1 en 2018-08-01

Содержание KD36V16










































































































Результаты поиска

Содержание KD36V16

Отзывы:

Похожие инструкции для KD36V16

Бренды по названию

Популярные бренды

Kohler KD36V16, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание KD36V16

Отзывы:

Похожие инструкции для KD36V16

Бренды по названию

Популярные бренды