Aerator Housing (3-Way Models)
Using the special tool provided, insert the prongs into the aerator
housing holes located on the face of the showerhead.
Remove the rubber gasket and the aerator plate. Turn the housing
over into your hand and let the aerator fall out. Clean both sides
of the aerator.
Replace the aerator into the housing, aligning the notch in the
aerator with the keyway in the housing.
Replace the aerator plate with the small diameter ring facing out.
Replace the gasket. Unless proceeding to service the front housing
assembly, replace the assembly into the showerhead.
Showerhead
Tool
Aerator
Plate
Aerator
Housing
Handshower
Gasket
Aerator
113747-5-A
4
Kohler Co.
