Kohler K-8703X, Руководство по установке и эксплуатации

Страница: 6 / 12

1019859-X2-B 6 Kohler Co.
2. Install the Lavatory
¨
Apply six self-adhesive pads along the top surface of the pedestal.
¨
Mark the pedestal centerline on the floor.
¨
Position the pedestal on the floor centerline. Refer to the roughing-in
information for correct placement.
¨
Carefully lift the lavatory into place on the pedestal. Level the lavatory and
add additional self-sdhesive pads as needed to level. If the boottom of the
lavatory contacts the pedestal, reposition the self-adhesive pads as needed.
Make sure the lavatory fits flat against the finished wall.
¨
Refer to the roughing-in information to ensure the correct distrance between
the pedestal and the wall.
¨
Make the two lavatory anchoring holes on the finished wall.
¨
Mark the pedestal anchoring holes on the floor through the hole in the pedestal
bottom.
¨
Carefully remove the lavatory from the pedestal.
¨
Carefully move the pedestal and lavatory away from the installation area.
¨
Drill 3/16” holes at the marked location on the finished wall and floor.
CAUTION: Risk of personal injury or product. This pedestal lavatory
is heavy. Get help lifting and moving it.
Washer
แหวนรอง
Cap Nuts
ฝาครอบนอต
Hanger Bolt
โบลท์แขวน
Pedestal
ขารองอ่าง
Screw
สกรู
Wash
แหวนรอง
Position Six Self-Adhesive
Pads to the Top of the Pedestal.
ตําแน่งแทบกาว 6 จุด
ด้านบนขาตั�ง
NOTE: You can also other fastening device of sufficient size and strength.