Product Information
Applicable product:
Bath whirlpool with spa/massage package
K-856-V
Fixture*:
Bathing well:
Basin area bottom
42
″
(106.7 cm) x 25
″
(63.5 cm)
Basin area top
58
″
(147.3 cm) x 29
″
(73.7 cm)
Weight
510 lbs (231.3 kg)
To overflow:
Water depth
18
″
(45.7 cm)
Capacity
96 gal (363.4 L)
* Approximate measurements for comparison only.
Drop-in cut-out
65-1/2
″
(166.4 cm) x 35-1/2
″
(90.2 cm)
Pump
kW
V
Hz
A
240
50/60
15
Heater
1.5
240
50/60
15
Required accessories:
Grip rails (pair)
K-9653
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current
Device (RCD):
Pump/control
220-240 V, 20 A, 50/60 Hz
Locate the outlet behind the whirlpool and within 24
″
(61 cm) of the pump.
Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of 81
lbs/square foot (395.4 kg/square meter) loading.
Hot water supply should be 70% of capacity or greater.
Installations will vary.
Fixture conforms to ASME Standard A112.19.1M. All dimensions
are nominal.
K-856-V
36" (91.4 cm)
11" (27.9 cm)
66" (167.6 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
1-1/2" OD
1/2" (1.3 cm)
2" (5.1 cm) Max
NOTE:
Pump/piping protrudes beyond rim.
23"
(58.4 cm)
18"
(45.7 cm)
2-1/2"
(6.4 cm)
3/4" (1.9 cm)
Pump/Control Access
No change in measurements with drain
shown. (K-7148-AF or K-7148M-AF)
34" (86.4 cm) W x
15" (38.1 cm) H Min
1023268-1-C
2
Kohler Co.
