Kohler K-8331T Series Скачать руководство пользователя страница 5

  

1329949-T01-B

Apply sealant. 

(optional)

Check for leaks.

Tab

Slot

Drain Pipe

Bath

Drain 

Gasket 

Drain Cover 

Assembly

Drain 

Body

Bath

Apply 100% 

silicone 

sealant to 

both sides.

Drain Body

4. Install the Plumbing

Care and Cleaning

  

   

Make the Drain Connections

NOTE:

 The drain cover is included in a small box located within the carton.

  Choose the thin drain gasket for PVC drain pipes or the thick gasket for brass pipes.

  Apply 100% silicone sealant to the inside and outside surfaces of the drain gasket to act as a lubricant.

  Install the drain gasket onto the drain pipe. Use a rubber mallet and 1-1/2

 PVC tubing to seat the gasket into 

the drain flange.

CAUTION:

 The edges of drain flange openings may be sharp.

NOTE:

 Make sure there is no interference with the drain gasket and the drain flange openings. The gasket must 

sit below the drain flange slots for the drain cover to work properly.

  Reassemble the drain cover assembly. Line up the tabs on the drain cover with the slots in the drain body 

and insert the drain cover assembly.

  Press the drain cover several times to make sure the drain opens and closes properly.

Apply Sealant - Optional

  If desired, apply a thin, continuous bead of clear or color-matched silicone sealant to the seam between the 

bath and the finished floor.

Install the Bath Filler

  Install the faucet valve and trim according to the faucet manufacturer's instructions.

  Close the bath drain. Fill the bath to the overflow, and check for leaks.

For best results, keep the following in mind when caring for your KOHLER product:

• 

Always test your cleaning solution on an inconspicuous area before applying to the entire surface.

• 

Wipe surfaces clean and rinse completely with water immediately after applying cleaner. Rinse and dry any 

overspray that lands on nearby surfaces.

• 

Do not allow cleaners to soak on surfaces.

• 

Use a soft, dampened sponge or cloth. Never use an abrasive material such as a brush or scouring pad to 

clean surfaces.

CAUTION: Risk of property damage. 

Make sure a watertight seal exists on all bath drain connections.

Содержание K-8331T Series













Отзывы: