Kohler K-77797T-0, Руководство по установке

Страница: 50 / 69

1323363-T01-E 50 Kohler Co.
Symptoms Possible Causes Recommended Actions
Trouble shooting
This guide of trouble shooting is for general help only. Authorized representatives or qualified electricians of Kohler Company
shall be able to solve all electrical failures. If you want to know about the service of warranty, please contact local dealers or
wholesalers.
A. Power failure
B. Plug not connected or no power to
socket
C. The leakage circuit breaker on plug
does not reset.
D. Product is on standby mode
A. Water failure
B. Tee valve for water supply is closed
C. Power failure
D. Product is at standby mode
E. Wash mode is in progress
F. Auto-flushing is deactivated
A. Filter screen is blocked
B. Insufficient water pressure.
A. Water failure
B. Tee valve for water supply is closed or
not opened completely
C. Product is on standby mode
D. Not yet seated or current sitting posture
unable to be sensed by the seat
E. Filter screen is blocked
F. Insufficient water pressure.
G. Incorrect air filter installation.
A. Flushing mode stops automatically after
continuous flushing for 5 minutes
B. The seat is unable to sense human body
A. The seat is covered by foreign matters
or the seat is wet.
A. The dryer fan stops automatically after
continuous usage for 4 minutes
B. The seat is unable to sense human body
A. The seat is unable to sense human body
B. Stop button is pressed by mistake during
operation
C. Auto deodorization function is deactivated
A. The seat is covered by foreign matters
or the seat is wet.
B. The toilet cover is interfered by people at
the open/close process before
A. Wait until the power is restored
B. Plug in or detect the socket
A. Wait until the water supply is restored
B. Open the tee valve for water supply
C. Wait until the power is restored or review " manual
A. Refer to " F ilter screen clean "
B. Check if all tee valves are opened. If not, please open;
C. Check bend problem on inlet hose, if so, adjust hose.
A. Wait until the water supply is restored
B. Fully open the tee valve for water supply
E. Review the section of "Washing the filter screen"
F. Check bend problem on inlet hose, if so, adjust hose.
G. Install filter correctly. (refer to Page 47 ).
A. If necessary, press the flushing button again.
B. Adjust your sitting gesture or sit on the toilet again.
A. Remove the foreign matters or dry seat.
A. If necessary, press the dryer button again.
B. Adjust your sitting gesture or sit on the toilet again.
A. Adjust your sitting gesture or sit on the toilet again.
B. If necessary, please leave for about 2S and then sit on
the toilet again.
C. Review "Guide on remote controller setting"
A. Remove the foreign matters or dry seat.
B. Use the remote control or manually open/close the
cover until it works properly. Do not block switch
during open/close process
1. Toilet does not
work.
2. Toilet fails to flush
3. Toilet is not clean
after flushing.
4. Wash mode is
abnormal.
5. Flush function
stops in operation
process.
6. The wash mode
runs even when
unseated.
7. Dryer fan stops in
operation process.
8. Deodorization fan
does not work
9. Cover fails to
close/open
C. Press Reset button on the plug
D. Press “ ” button on auxiliary keyboard.
flush" section for manual flush or flush by basin.
D. Press “ ” button on auxiliary keyboard.
E. Perform after flushing operation completed. F.
Review "Guide on remote controller setting"
C. Press “ ” button on auxiliary keyboard.
D. Seated or adjust your sitting gesture