6. Install the Center Guide
Using a pencil, make a small mark on the threshold at the center of the bottom track on the inside
of the shower.
Position the center guide on the bottom track with the front lip of the center guide in the groove of
the bottom track.
Position both door panels so they are aligned in the slots in the center guide.
Holding the center guide tightly against the bottom track, make sure the door panels can roll from
wall-to-wall without binding.
If the doors bind, refer to the panel installation sections and make the needed adjustments.
IMPORTANT! Risk of product damage.
Do not overtighten the screws. The center guide may crack.
While holding the center guide tightly against the bottom track, drive in the provided self-tapping
screw with a screwdriver. Repeat with the second screw.
Panels
Center Guide
Self-tapping
Screws
Bottom Track
Bottom Track
Threshold
Center Guide
1054859-2-B
12
Kohler Co.
