1025490-2-
A
3
Kohler Co.
Threaded Hole
Use For 6350
Faucet Body
Mounting
Stud
Hose
Hose
Connector
1. Install the Mounting Stud
-
Remove the temporary nipple.
-
Apply thread sealant and install a 1/2” NPT nipple to the bath
elbow. The nipple should extend 1/2” (1.3cm) beyond the finished
wall.
-
Apply plumbers putty or other sealant to the inlet end of the spout
according to the putty manufacturer’s instructions.
-
Apply thread sealant to the nipple, and install the spout to the
nipple.
-
Carefully tighten with a clean strap wrench and remove any excess
putty.