1. Confirm Water Flow Rate
Turn off the water supply.
Remove the existing supply stop and hose.
Install the supply pipe at the location shown in the
″
Prepare the Mounting Location
″
section.
Slide the cover plate onto the supply pipe.
Apply thread sealant to the supply pipe end (1/2
″
NPT male).
Thread the supply stop (1/2
″
NPT female) onto the wall at the water supply.
Direct the supply hose end into a 3 gal (14 l) or larger bucket.
Make sure that the supply stop can provide a minimum of 1-1/2 gal (7 l) or more in 10 seconds.
Shut off the water supply.
Disconnect the previously installed supply hose.
Cover Plate
1226974-2-B
4
Kohler Co.
