Product Information
Left drain hole (less grip
rails)
K-513-H2
not shown
Right drain hole (less grip
rails)
K-514-H2
not shown
Left drain hole (grip rails)
K-783-H2
shown
Right drain hole (grip rails)
K-784-H2
not shown
Required accessories:
Jet trim kit
K-9694
Grip rails (pair)
K-9620
Fixture*:
basin area
top area
weight
Bathing
well
42-1/2
″
(108 cm) x
20
″
(50.8 cm)
53-3/4
″
(136.5 cm)
x 24
″
(61 cm)
460 lbs
(208.7
kg)
water depth
capacity
To
overflow
10-3/4
″
(27.3 cm)
45 gal (170.3 L)
* Approximate measurements for comparison only.
Pump
Heater
V
A*
1.5 hp
1.5 kW
240
11
* Approximate measurements for comparison only.
No change in measurements if connected with the drain
illustrated. (K-7160-AF or K-7160M-AF)
Minimum access panel:
Pump/control
32
″
(81.3 cm) W x
15
″
38.1 cm) H
required
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI) or Earth-Leakage
Circuit-Breaker (ELCB):
Pump/control
208-240 V, 20 A, 50/60 Hz
Locate the outlet behind the whirlpool and within 24
″
(61 cm) of the pump.
Installation Notes
Install this product according to the installation guide.
Cast iron whirlpools are extremely heavy, making some drop-in
installations difficult. Splitting the deck/surround is recommended
if installing into a deck.
Floor support under whirlpool must provide for a minimum of
1200 lbs (544.3 kg).
K-783-H2
1-1/2" IPS Thread
1-5/8" (4.1 cm)
1-1/2" IPS
1/4" (6 mm)
2-7/8" (7.3 cm)
3" (7.6 cm)
3-1/4" (8.3 cm)
60" (152.4 cm)
3/4" (1.9 cm)
Note: Top view shown with grip rails.
16-1/4"
(41.3 cm)
32" (81.3 cm)
15-3/8"
(39.1 cm)
8-1/2"
(21.6 cm)
Pump/Control Access
1019456-1-C
2
Kohler Co.