-3-
Fig.3
3
Fig.4
4
Fig.5
5
1.
3
1. After unpacking, screw out adjustable feet (see Fig.3).
Place the cabinet at a desired position in the bathroom,
and then adjust the four adjustable feet to put the cabinet in
place.
2. Pre-drill the floor drainage hole if the bathroom is suitable
for floor drainage.
Position the cabinet against the finished wall.
Mark the drain location on the bottom panel. Move the
cabinet away from the wall.
Drill floor drainage hole on the bottom panel with a
suitable drill.
Put the cabinet against the wall and align the drainage
hole with the drainage pipe.
·
·
·
·
3. Take out the handle, buffer and shelf support to prepare
for installation.
Install the handle and buffer as shown in the picture below.
·
·
Install the shelf support to the desired height as shown in
the picture below, and put the adjustable shelf downwards
and clip into place.
2.
·
·
·
·
3.
·
·
Go up
Go down
2
2
1
1
1202483-T01-B
