-3-
b)
b) Floating rim joint.
9)
a)
9) If the apron on your bath has a "fixed" joint, then fix
the apron to the bath using the screw provided.
a) Fixed rim joint and screws being inserted.
10)
5mm
605mm
10) For fixed rim baths place the bath and apron upside
down on a level surface. Adjust the feet to protrude
aproximately 5mm past the skirt. Ensure the feet
are level with the floor by placing a spirit level
across them.
For floating rim joint baths adjust the feet to give a
level bath and the distance from the feet to the top
of the bath should be 605mm.
For fixed rim baths and the floating rim joint baths,
the weight of the baths should be supported by the
feet.
5mm
11)
12)
13)
11) With the skirt attached to the bath, connect the
plumbing to the bath.
12) Place the apron and bath over the feet clips and
slide the bath into the feet clips to lock the unit to
the floor. If the bath does not fit tightly into the clips,
remove the bath and adjust the nuts so that it does.
13) Fill the bath with water and test for leaks.
K-45346T
1175503-T01-A
