Kohler K-4107X, Руководство по установке

Страница: 4 / 20

1194357-X2-B 4 Kohler Co.
1. Match Toilet roughing-in requirement and Installation tips
2. Install an Electrical outlet
1 Distance between installation holes: 136-210 mm
2 Distance between instalaltion holes and tank front rim: > 20 mm
3 Distance between instalaltion holes and bowl inner rim: < 70 mm
4 Distance between installation holes and tank top rim: 460-490 mm
5 Bowl inner diameter: 370-390 mm
NOTE: The distance between the seat and the plug should be maximum 1 meter.
WARNING: Risk of electric shock, fire, or personal injury.
This product must be ground. Connect to a dedicated 220-240 V, 50/60 Hz,
10A circuit protected by Ground-Fault Circuit-Interrupter(GFCI) or
Earth-Leakage Circuit-Breaker (ELCB).
¨
It is recommended to use water-resistant socket. Do not use an extension
cord with the product.
NOTE: Follow local codes when determining the electrical outlet location.
¨
Route the electrical and install to a 220-240V GFCI-or ELCB-protected
receptacle.
3. Preparation
¨
Remove the existing toilet seat. Turn off the water supply to the toilet.
¨
Flush the toilet to relieve any pressure from the water supply hoses.
¨
Position a container under the fill valve to catch any excess water.
¨
Disconnect the water supply hose from the toilet fill valve.
1
2
3
4
5