-12-
Step Three:
Remove two M4 screws and panel from the side surfaces
of the machine (by pushing the panel shaft from one end
where there is a hatch hinge, and push the other end next).
Step Four:
Use 4 BTP4*10 triangular self-tapping screws to lock the
machine and mounting hanger.
Step Five:
Take down the wiring cover plate. Insert the power cord
and 2 signal lines into the wire terminals. Tighten the
terminal screws and fix the lines. Finally, mount the wiring
cover plate.
M4
LED
(
)
BTP4*10
(4
)
BTP4*10
(4
)
3
2
Panel Shaft
Panel Shaft
Hatch Hinge
Hinge
M4*10 Screw
(Two)
M4*10
(
)
Panel
Decorative Screw Case
BTP4*10 Triangular
Self-tapping Screw(Four)
BTP4*10
(4
)
Hanger
Power Cord
L
N
Terminal
Wire Box Cover
Signal Line
1369765-T01-A
