Optional Temperature Limiting Adjustment (cont.)
NOTE:
Pry the outer locking ring up equally at either side in order
to remove it from the valve.
Using a small flat-blade screwdriver, pry up the outer locking
ring.
Rotate the position of the locking ring relative to the inner geared
ring as desired.
Align the geared teeth and slide the locking ring back into
position.
Reinstall the bonnet.
Place the handle back onto the assembly.
If desired, test the setting and repeat these steps in order to make
further adjustments.
When all adjustments are complete, secure the handle by
tightening the setscrew with a hex wrench.
Place the plug button in place.
Care and Cleaning
For best results, keep the following in mind when caring for your
KOHLER product:
•
Use a mild detergent such as liquid dishwashing soap and warm
water for cleaning. Do not use abrasive cleaners that may scratch
or dull the surface.
•
Carefully read the cleaner product label to ensure the cleaner is
safe for use on the material.
•
Always test your cleaning solution on an inconspicuous area
before applying to the entire surface.
•
Do not allow cleaners to sit or soak on the surface.
•
Wipe surfaces clean and rinse completely with water immediately
after cleaner application. Rinse and dry any overspray that lands
on nearby surfaces.
•
Use a soft, dampened sponge or cloth. Never use an abrasive
material such as a brush or scouring pad to clean surfaces.
For detailed cleaning information and products to consider, visit
www.kohler.com/clean. To order Care & Cleaning information, call
1-800-456-4537.
1107634-5-A
4
Kohler Co.
