8. Supply Connections
If the lavatory is not installed, install it at this time. Follow the
lavatory manufacturer’s instructions.
Connect the flexible hoses to the supply stops. (Left is hot - right
is cold.)
Wrench-tighten all connections.
9. Installation Checkout
Connect the tailpiece and P-trap.
Ensure that all connections are tight.
Remove the aerator.
Open the drain.
Turn on the main water supply.
Check for leaks in the supply piping. Repair any leaks.
Lift the faucet handle, and run hot and cold water through the
spout for about a minute to remove any debris.
Check for leaks in the drain piping. Repair any leaks.
Turn the faucet off.
Remove any debris from the aerator and reinstall.
Supply
Stop
Supply
Hose
Spout
Aerator
1002277-2-C
10
Kohler Co.
