-5-
1051705-T01-A
STEP
3
Fig. 5
5
Apply foam tape to side kit bracket
DO NOT PEEL RELEASE LINER UNTIL YOU HAVE TEST FIT THE SIDE KITS ON THE MIRRORED CABINET!
·
·
Peel tape from sheet, leave liner on.
Apply as shown to side kit brackets, be sure they are clean and dry.
·
STEP
2
Fig. 4
4
Top clips slide into this screw
channel from center opening.
Top of cabinet frame member
2 Top clips
2
WALL
Sit the mirrored cabinet on the mounting bar, then lower and tighten the
screws into place, as shown in Fig.4.
4
Screws ST3.5
35 & Wall anchor
ST3.5
35
Top clip for
surface mount
2 per cabinet
1132363-T01-B
