-3-
2.
X
Fig.2
2
X
2075
X/2
175
175
920
300
250
420
220-240
V
Level
Level
UNIT: mm
2. Mark the position of the hole for installation on the wall
according to dimensions as illustrated. X dimension means
the width of mirror you will install. Using the level to make
sure that the holes is level.
Caution!
Note:
Avoid the cables and pipes inner set when
drilling in the wall.
Different types of bolts are required for different
decoration boards. Please apply suitable bolts and board nuts.
3.
4.
5.
Fig.3
3
Fig.4
4
X
3. Ensure that the electricity supply cables
(
three cores
)
for
illumination are installed.
4. Using suitable bolts and board nuts fixed the mirror shelf
on the wall and make sure the mirror is level.
5. If you have mirror light, please connect circuit as shown.
All circuit connections should
be made by licensed electricians, and please observe all local
electricity codes.
Cut off power before
connecting circuit.
Connect electrical source with suitable connector and put the
cable in the middle of mirror shelf.
Warn! Risk of Electric Shock.
Warn! Risk of Electric Shock.
1047424-T01-E
