Product Information
Applicable product:
Integral apron and heater, left drain
K-1209-HL
Integral apron and heater, right drain
K-1209-HR
Fixture*:
Bathing well:
Basin area, bottom
47
″
(119.4 cm) x 20
″
(50.8 cm)
Basin area, top
53
″
(134.6 cm) x 23
″
(58.4 cm)
Weight
105 lbs (47.6 kg)
To overflow:
Water depth
14-1/2
″
(36.8 cm)
Capacity
64 gal (242.3 L)
* Approximate measurements for comparison only.
Pump:
V
Hz
A
Pump: 1-speed
120
60
7.5
Heater: 1 kW
120
60
12.5
Required Electrical Service (2 required)
Two dedicated circuits required, each protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
120 V, 15 A, 60 Hz
Heater
120 V, 15 A, 60 Hz
Locate the outlets behind the whirlpool and within 24
″
(61 cm)
of the pump and heater.
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
50 lbs/square foot (243 kg/square meter) loading.
If installing a rim-mount faucet, make sure there is no interference
with the drain overflow and circulating system before drilling any
holes. Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
No change in measurements if connected with drain
illustrated. (K-7161-AF or K-7161M-AF)
Recommended Faucet Area
3"
(7.6 cm)
20"
(50.8 cm)
8-11/16" (22.1 cm)
1-11/16"
(4.3 cm)
60" (152.4 cm)
3"
(7.6 cm)
2-7/8"
(7.3 cm)
1" (2.5 cm)
32" (81.3 cm)
16"
(40.6 cm)
1-1/2" OD
1-1/4"
(3.2 cm)
1/2" (1.3 cm)
R. Max
Integral
Flange Detail
1014675-1-B
2
Kohler Co.
