Product Information
Applicable product:
Drop-in rim style
K-1162-H
Fixture*:
Bathing well:
Basin area, bottom
43
″
(109.2 cm) x 21-9/16
″
(54.8 cm)
Basin area, top
53-1/2
″
(135.9 cm) x 32-1/8
″
(81.6 cm)
Weight
110 lbs (50 kg)
To overflow:
Water depth
15” (38.1 cm)
Capacity
57 gal (215.9 L)
* Approximate measurements for comparison only.
V
Hz
A
Pump: 1-speed
120
60
7.5
Heater: 1.5 kW
120
60
12.5
Minimum access panel
pump/control (required):
20
″
(50.8 cm) W x
15
″
(38.1 cm) H
Included components:
Cut-out template
1042556-7
Required Electrical Service (2 required)
Two dedicated circuits required, each protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
120 V, 15 A, 60 Hz
Heater
120 V, 15 A, 60 Hz
Locate the outlets behind the whirlpool and within 24
″
(61 cm)
of the pump and heater.
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
35 lbs/square foot (170 kg/square meter) loading.
The suction line extends 4-3/4
″
(12.1 cm) beyond the edge of the
rim. The pump base extends 1/8
″
(3 mm) beyond the edge of the
rim. Modify the framing as needed.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
21"
(53.3 cm)
Pump/Control
Access
19-1/2"
(49.5 cm)
21"
(53.3 cm)
1-1/2"
(3.8 cm)
3-1/8"
(7.9 cm)
3-1/2"
(8.9 cm)
1-1/2" OD
10-13/16" (27.5 cm)
60" (152.4 cm)
42" (106.7 cm)
4-5/8" (11.7 cm)
3/8" (1 cm)
3" (7.6 cm)
2-7/8" (7.3 cm)
Drop-In Rim Detail
Recommended faucet area
No change in measurements if connected with
drain illustrated. (K-11677 or K-11677M)
1042013-1-C
2
Kohler Co.
