Product Information
Applicable product:
Drop-in bath whirlpool - custom pump locations
K-1158-HB
Drop-in bath whirlpool - custom pump locations
K-1158-HE
Drop-in bath whirlpool - custom pump locations
K-1158-HJ
Fixture*:
Bathing well:
Basin area,
bottom
46
″
(116.8 cm) x 30
″
(76.2 cm)
Basin area, top 57
″
(144 .8 cm) x 34
″
(86.4 cm)
Weight
130 lbs (59 kg)
To overflow:
Water depth
16
″
(40.6 cm)
Capacity
95 gal (359.6 L)
* Approximate measurements for comparison only.
Included components:
Cut-out template
1043292-7
Pump
Heater
V
Hz
A
1.5 kW
220-240
50/60
11
Required accessories:
Jet trim kit
K-9698
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current
Device (RCD):
Pump/control
220-240 V, 20 A, 50/60 Hz
Locate the outlet behind the whirlpool and within 24
″
(61 cm) of the pump.
Notes
Install this product according to the installation guide.
The pump must be relocated to its custom position at the time of
installation. Provide adequate clearance.
Floor support under whirlpool must provide for a minimum of 48
lbs/square foot (233.6 kg/square meter) loading.
Hot water supply should be 70% of capacity or greater.
Installations will vary.
This bath whirlpool is designed for drop-in installation only. It is
not suited for use in a three-wall alcove with an overhead shower.
Fixture conforms to ANSI Standard Z124.1.2. All dimensions are
nominal.
2-1/4"
(5.7 cm)
1-1/2" OD
2-3/4"
(7 cm)
10" (25.4 cm)
Max
10" (25.4 cm) Max
10" (25.4 cm) Max
1" (2.5 cm)
2-7/8"
(7.3 cm)
No change in measurements if connected
with drain illustrated. (K-7161-AF)
2"
(5.1 cm)
22"
(55.9 cm)
9" (22.9 cm)
41-3/4" (106 cm)
65-7/8" (167.3 cm)
20-7/8"
(53 cm)
K-1158-HE Pump/Control Access
34" (86.4 cm) W x 15" (38.1 cm) H
K-1158-HB Pump/Control Access
34" (86.4 cm) W x 15" (38.1 cm) H
K-1158-HJ Pump/Control Access
34" (86.4 cm) W x 15" (38.1 cm) H
1043844-1-C
2
Kohler Co.
