Product Information
Applicable product:
Drop-in rim style with heater, custom pump
location
K-1154-HC
Fixture*:
Bathing well:
Basin area, bottom
44” (111.8 cm) x 36” (91.4 cm)
Basin area, top
56” (142.2 cm) x 43” (109.2 cm)
Weight
70 lbs (31.8 kg)
To overflow:
Water depth
15
″
(38.1 cm)
Capacity
76 gal (287.7 L)
* Approximate measurements for comparison only.
Pump:
V
Hz
A
Pump: 1-speed
120
60
7.5
Heater: 1.5 kW
120
60
12.5
Minimum access panel
pump/control (required):
20
″
(50.8 cm) W x
15
″
(38.1 cm) H
Required Electrical Service (2 required)
Two dedicated circuits required, each protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
120 V, 15 A, 60 Hz
Heater
120 V, 15 A, 60 Hz
Locate the outlets behind the whirlpool and within 24
″
(61 cm)
of the pump and heater.
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
36 lbs/square foot (176 kg/square meter) loading.
Pump must be relocated to custom position at the time of
installation. Provide adequate clearance.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
Drop-in Rim Detail
20-1/2"
(52.1 cm)
1/2" (1.3 cm)
2-5/8" (6.7 cm)
Cut-out Detail
25" (63.5 cm)
52-1/2"
(133.4 cm)
135˚
135˚
1-1/2"
(3.8 cm)
Pump/Control Access
20" (50.8 cm) W x 15" (38.1 cm) H
2-7/8" (7.3 cm)
3" (7.6 cm)
1-1/2" OD
54" (137.2 cm)
26" (66 cm)
54"
(137.2 cm)
30-3/4"
(78.1 cm)
56-1/2"
(143.5 cm) 30-3/4" (78.1 cm)
13"
(33 cm)
4-7/8"
(12.4 cm)
26" (66 cm)
39-3/4" (101 cm)
No change in measurements if connected with
drain illustrated. (K-11677 or K-11677M)
1012948-1-C
2
Kohler Co.
