Product Information
Drop-in bath whirlpool
K-1014-HA
shown
Required accessories
Jet trim kit
K-9698
Fixture*:
basin area
top area
weight
Bathing
well
42
″
(106.7 cm) x
20
″
(50.8 cm)
51
″
(129.5 cm) x
24
″
(61 cm)
110 lbs
(49.8 kg)
water depth
capacity
To
overflow
14
″
(35.6 cm)
60 gal (227 L)
* Approximate measurements for comparison only.
Pump
Heater
V
Hz
A
1.5 Hp
1.5 kW
240
50/60
11
Included component:
Cut-out template
1022451-7
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI) or Earth-Leakage
Circuit-Breaker (ELCB):
Pump/control
220/240 V, 20 A, 50/60 Hz
Installation Notes
NOTE:
Pump protrusion beyond rim.
Install this product according to the installation guide.
Pump must be relocated to custom position at the time of
installation. Provide adequate clearance.
Floor support under whirlpool must provide for a minimum of
1800 lbs. (816.5 kg).
Hot water supply should be 70% of capacity or greater.
Installations will vary.
Fixture conforms to ANSI Standard Z124.1. All dimensions are
nominal.
1" (2.5 cm)
16"
(40.6 cm)
11"
(27.9 cm)
9" (22.9 cm)
60" (152.4 cm)
2-3/4"
(7 cm)
1-1/2" O D
2-1/2"
(6.4 cm)
20"
(50.8 cm)
32" (81.3 cm)
Pump Protrudes
1-1/2" (3.8 cm)
No change in measurements with drain
shown. (K-7161-AF or K-7161M-AF)
Pump/Control Access
24" (61 cm) W x
15" (38.1 cm) H Min
2"
(5.1 cm)
Pump/Control Access
24" (61 cm) W x
15" (38.1 cm) H Min
2-1/4"
(5.7 cm)
1033683-1-B
2
Kohler Co.
