Kohler GM93516-KP1, Руководство по установке

Страница: 6 / 16

6 TT-1675 5/16
6. Install the bulkhead connection panel.
6.1 Connect the fuel-inlet line to the fuel-inlet opening
on the bulkhead connection panel.
6.2 Connect the fuel-return line to the fuel-return
opening on the bulkhead connection panel.
6.3 Connect the seawater hose to the seawater
connection on the bulkhead connection panel and
secure with a hose clamp (X-426-2).
6.4 Secure the bulkhead connection panel (GM93545
or GM95450) to the corner rails (GM94934) using
brackets (GM86091 qty. 2), bolts (X-6224-20
qty. 4), and nuts (X-6210-7 qty. 4). See Figure 10.
1
1. Brackets (GM86091 qty. 2), bolts (X-6224-20 qty. 4), and
nuts (X-6210-7 qty. 4)
2. Bulkhead connection panel (GM93545 or GM95450)
GM93516-B
2
1
Figure 10 Secure Bulkhead Connection Panel to
Corner Rails
7. Internal Rails, Top Rails, and Bracket
Installation
3
GM93516-B
1. Rails (GM94933 qty. 2). See Figure 12 for bracket location.
2. Internal rails (GM94936 qty. 2) See Figure 12 for bracket
location.
3. Rail (GM94935 qty. 2)
4. Corner (GM86035 qty. 4) and screw (X-67-141 qty. 24)
5. Foam (GM87548 or GM88911 qty. 2)
1
4
1
2
5
Figure 11 Top Rail and Bracket Installation
7.1 Position the internal rails (GM94936 qty. 2) as
shown in Figure 11.
On each end of the internal rail, secure a mounting
bracket (GM86091) using four bolts (X-6224-20)
and four nuts (X-6210-7) per bracket. See
Figure 12 for more detail.
Note: Do not final tighten at this time.
7.2 Cut foam (GM87549 or GM88912) to length and
insert into the rails (GM94933 qty. 2 and GM94935
qty. 2). See Figure 12.
7.3 Install foam (GM87548 or GM88911 qty. 2) on the
ends of the internal rail as shown in Figure 11.
7.4 Position the rails (GM94933 qty. 2 and GM94935
qty. 2) as shown in Figure 11.
7.5 Attach the brackets (GM86091) to the service side
rail (GM94935) using the hardware specified at
the locations shown in Figure 12.
7.6 Attach the remaining brackets (GM86091) using
the hardware specified at the locations shown in
Figure 12.
7.7 Secure the corners (GM86035 qty. 4) to the rails
as shown in Figure 11 using six screws (X-67-141)
per corner.