3. Install the Wall Brackets
NOTE:
If the wall or floor is not level or plumb, the dimensions will not be correct. Adjust the
dimensions as needed if the wall or floor is out of level or plumb.
Mark the intended center of the sink on the wall.
Locate the inner edges of the brackets 8-7/8
″
(225 mm) from the centerline. The tops of the brackets
should be 40
″
(1016 mm) above the finished floor.
Level the brackets and mark all of the holes.
Predrill holes for each fastener.
Secure the brackets with 1/4
″
screws (not provided). Use all holes and slots if possible.
40"
(1016 mm)
8-7/8"
(225 mm)
8-7/8"
(225 mm)
Sink Centerline
Kohler Co.
5
1330810-2-A