background image

-1-

BEFORE YOU BEGIN

安装之前

© Copyright Kohler China Investment Co., Ltd. 2019

© 

版权为科勒(中国)投资有限公司所有

 2019

ZHONGSHAN KOHLER SHOWER CO., LTD.     NO13-1, XINGYE ROAD, ZHONGSHAN TORCH 

DEVELOPMENT ZONE, ZHONGSHAN, GUANGDONG, CHINA     POST CODE: 528437

中山科勒卫浴有限公司

 

广东省中山市中山火炬开发区兴业路

 13-1 

 

邮编:

528437

• 

说明书中所有的资料是按最新出版的产品资料编写而成。科

勒中国有限公司保留任何时候无须通知即可改变产品特性、

包装或产品可供类型的权利。

• 

说明书包括重要的安装、清洁及保养方面的内容,

请把这些

资料交给用户阅读,保管。

• 

确保在安装淋浴房之前已经完整正确地安装了浴室和完工

墙面材料。淋浴区墙地面应做防水处理,并不得布置有电器

开关、插座。确保地面排水通畅。

• 

在进行淋浴房安装之前,请拿出、排列并确认所有的零部件。

请参考第

 2 

页上所示的分解图。

• 

对尺寸与本标准产品不同的定制淋浴房,参照本说明书进行

安装。

• 

本产品符合

 QB 2584-2007

• 

All information is based on the latest product information 

available at the time of publication. Kohler China Ltd. 

reserves the right to make changes in product 

characteristics, packaging, or availability at any time 

without notice.

• 

These instructions contain important care, cleaning, and 

warranty information-

please leave these instructions for 

the consumer.

• 

Make sure that the bath and the finished wall material are 

completely and correctly installed prior to installing your 

shower door. Prepare waterproof layer to wall and floor of 

the showering area. It is not allowed for any presence of 

electric switches and sockets. Make sure the floor drain 

runs smoothly.

• 

Before starting the door installation, lay out and identify all 

the parts. Use the exploded view illustrated on page 2 for 

reference.

• 

For the installation method of customized shower with 

different dimensions, please refer to this instructions.

• 

The product complies with QB 2584-2007.

警告:可能有人员伤害或者产品损坏的危险。

钢化玻璃不能进行切割,钻孔或硬物敲击。搬移或安装过

程中,小心确保玻璃边、角部位不受撞击,以防爆裂伤人。

建议:

将本产品安装在科勒淋浴盆或挡水条上(需另行购买)。

如自备挡水条,建议顶面宽度尺寸大于

 80mm

重要事项:

淋浴房需要安装在平坦垂直的墙面上。墙面的垂直度推

荐在正负

 3mm/m 

以内。如果超出此范围,科勒公司将不保证淋浴

房的完美使用。

CAUTION: Risk of injury or product damage. 

Tempered glass cannot be cut, drilled or knocked by 

hard object. Make sure corner area of the glass 

refraining from knocking so as to cause personal injury 

due to broken glass.

ATTENTION:

 Please install this door on Kohler receptors or 

curbs(Not included). If the curb is not Kohler-branded, please 

note its top width should be more than 80mm.

IMPORTANT: 

The shower door requires a flat vertical 

finished wall. The squareness of the wall is recommended no 

more than 3 mm/m. KOHLER Company won't take 

responsibility of the installation quality.

24hrs

ROUGHING-IN

尺寸图

Unit: mm

单位:毫米

Do not use the enclosure for at least 24 hours.

安装后

 24 

小时内请勿使用淋浴房。

FAMILY CARE 2.0

INSTALLATION INSTRUCTIONS

安装说明书

L SHAPE, 1D2P, 10mm FM

开门

L

型,两固一活,

10mm

贴膜玻璃

K-701646T-FM-SHP

 L SHAPE,1D2P, 8mm FM

开门

L

型,两固一活,

8mm

贴膜玻璃

K-701650T-FM-SHP

SKU

B

H

900-1450

C

250-1100

1850-2200

K-701646T
K-701650T

1415130-T01-A

B

C

C

H

B

Содержание Family Care 2.0 K-701646T-FM-SHP

Страница 1: ... Before starting the door installation lay out and identify all the parts Use the exploded view illustrated on page 2 for reference For the installation method of customized shower with different dimensions please refer to this instructions The product complies with QB 2584 2007 警告 可能有人员伤害或者产品损坏的危险 钢化玻璃不能进行切割 钻孔或硬物敲击 搬移或安装过 程中 小心确保玻璃边 角部位不受撞击 以防爆裂伤人 建议 将本产品安装在科勒淋浴盆或挡水条上 需另行购买 如自备挡水条 建议顶面宽度尺寸大于 80m...

Страница 2: ...me 门玻转角边框 Bottom Fixed Seat 下固定座 Decorated Cover 下固定座装饰盖 Grub Screw 内六角紧固螺钉 Hinge Sleeve 轴套 Hinge Shaft 转轴 Sealing Strip 门底挡水胶条 Decorated Cover of Inner Fixed Block 固玻内固定块装饰盖 M4X25 Screw M4X25 十字槽沉头螺钉 Inner Fixed Block 内固定块 Fixed Block Washer 固定块垫片 Bottom Strip of Fixed Glass 固玻下胶条 External Fixed Block 外固定块 Front Fixed Panel 固玻 Wall Top Cover 墙材端盖 Side Frame Top Cover 边框上端盖 ST3 5X40 Cross Slot Pan...

Страница 3: ...at the center post is pressed against the side frame of the side panel glass 3 Fix the center post and the side frame of the side panel glass together using screws ST3 5x8 1 将正面靠墙侧边框和墙材与墙壁固定 2 调整正面边框墙材上的调节螺钉 使中立柱和侧固玻边框贴合 3 将正面中立柱和侧固玻边框用螺钉 ST3 5X8 固定 1 Drill a Φ3 0mm bottom hole by reference to the hole in the side jamb 2 Fix the side jamb and the vertical frame together using screws ST3 5x12 Then ...

Страница 4: ...e Properly adjust the door glass Tighten the limiting hinge assembly and the decorated cover 3 Install the waterproof seal at bottom of the door glass 1 安装门把手 安装上横梁 竖材 转角边框上的装饰胶条 2 安装门玻侧挡水胶条 调整好门玻的位置 锁紧限位铰链组件 锁紧下固定座装饰盖 3 安装门玻下挡水胶条 1 Install the seal at bottom of the panel glass Insert the panel glass into the vertical frame 2 Install the seal on the top and side of the panel glass 3 Install the bo...

Отзывы: