-6-
Cleaning
Caution! Risk of product damage.
Caution! Risk of product damage.
Caution! Do not use in-tank cleaners.
Many cleaners
contain abrasive and chemical substances, and should
not be used for cleaning stainless steel, enamel,
plated or plastic fittings. These finishes should be
cleaned using a mild washing up detergent or soap
solution, rinsed and then wiped dry with a soft clean
cloth.
Most toilet bowl
cleaners are not harmful to the vitreous china surface
of the toilet bowl. Please follow the bowl cleaner
manufacturer
,
s instructions carefully.
Products
containing chlorine (calcium hypochlorite) can
seriously damage fittings in the tank. This damage can
cause leakage and property damage.
CAUTION: Don t use any cement while installing
the toilet.
WARNING: Risk of product damage.
Heat expansion of the toilet may damage
the feet of the toilet. Kohler will not be responsible for
any damage because of using cement.
Do not throw into the toilet what is easy to block it,
such as newspaper, paper pilch, sanitary towel.
Do not bump the vitreous china with great force to
prevent it from damaging and leaking.
Do not use the product in the water below 0 C.
o
'
Please do not use hard materials (like
scouring pad) to clean product surface, especially the
product logo.
CAUTION:
0 C
o
USER MAINTENANCE
USER MAINTENANCE
6. Install the threaded rods through
the seat holes in the bowl. Tighten
bolts with hex wrench. Making sure
that they install correctly in the
holes in the floor.
It is suggested to use other auxillary
light such as torch to eluminate one
preserved installation hole of the
toilet. Watch the movement of the
threaded rod through the other
installation hole to better control the
installation process.
6.
Fig.#7
7
NOTE:
Do not use white cement or
high lime content cements to install
this toilet. The expansion of cement
due to a rise in temperature may
make the toilet crack or cause
damage. Kohler is not responsible
for any damage caused by
installation with the use of cement.
1269084-T01-D
