background image

5

19 590 04 Rev. --

KohlerEngines.com

EN

Maintenance Instructions

 

WARNING

Before working on engine or equipment, disable 

engine as follows: 1) Disconnect spark plug 

lead(s). 2) Disconnect negative (–) battery cable 

from battery.

Accidental Starts can cause 

severe injury or death.
Disconnect and ground spark 

plug lead(s) before servicing.

Normal maintenance, replacement or repair of emission control devices and systems may be 

performed by any repair establishment or individual; however, warranty repairs must be performed 

by a Kohler authorized dealer found at KohlerEngines.com or 1-800-544-2444 (U.S. and Canada).

Oil Recommendations

We recommend use of Kohler oils for best 

performance. Other high-quality detergent 

oils (including synthetic) of API (American 

Petroleum Institute) service class SJ or higher 

are acceptable. Select viscosity based on air 

temperature at time of operation as shown in 

table below.

°F -20

0

20

32 40

60

50

80

100

°C -30

-20

-10

0

10

20

30

40

20W-50

10W-30

SAE 30

 5W-30

Check Oil Level

NOTE:   To prevent extensive engine wear or 

damage, never run engine with oil level 

below or above operating range 

indicator on dipstick.

Ensure engine is cool. Clean oil fi ll/dipstick 

areas of any debris.
1. Remove dipstick; wipe oil off .
2. Reinsert dipstick into tube; press completely 

down.

3. Remove dipstick; check oil level. Level 

should be at top of indicator on dipstick.

4. If oil is low on indicator, add oil up to top of 

indicator mark.

5. Reinstall and secure dipstick.

Maintenance Schedule

Every 100 Hours or Annually¹
 ● Change oil. Oil fi lter is recommended.
 ● Remove cooling shrouds and clean cooling areas.
Every 150 Hours¹
 ● Check air cleaner element.
 ● Replace unique Electronic Fuel Injection (EFI) fuel fi lter.
 ● Check oil cooler fi ns, clean as necessary (if equipped).
Every 200 Hours
 ● Change oil fi lter.
Every 300 Hours
 ● Replace air cleaner element and check inner element (if equipped).
Every 500 Hours or Annually¹
 ● Replace spark plugs and set gap.
Every 600 Hours
 ● Replace air cleaner inner element (if equipped).
Every 600 Hours

2

 ● Have valve lash checked/adjusted.

1

 Perform these procedures more frequently under severe, dusty, dirty conditions.

2

 Have a Kohler authorized dealer perform this service.

Содержание Command PRO EFI ECV850









Отзывы: