Open cartridge cover when use filter first time.
Tighten all connections.
Tighten filter inlet
Connect to cover
Connect to water tank
IMPORTANT! Risk of product damage.
Align water inlet hose thread with cover
thread, do not damage threads or over tighten connector. To tighten the connector,
manually tighten and tight 1/4 turns more by tool.
IMPORTANT! Risk of product damage.
Do not scratch the product surface.
NOTE!
For those newly installed plumbing pipes, (before the inlet hose is
connected to the T-valve,) flush for several seconds to to remove the dirt and
debris, etc inside the hose.
Connect cover and water tank with supplied hose.
Note:
use supplied new hose, do not reuse the old hose.
Adjust filter angle and position (for easy exchange in the future, cartridge
exchange refer to “Homeowner’s Guide” on page
14
).
Adjust exchange duration to 6 months.
Turn on water supply system
Note!
Flush the water supply pipes completely to remove debris. The product
is designed for tap water. Make sure not to use industrial water/sewage water/
waste water/ocean water.
Check water leak, adjust if necessary.
Connect the T-valve directly to the water inlet valve.
Rotate and install cartridge cover properly (refers to Homeowner’s Guide on
Page 1
4
).
6.1 Connect the Water Supply
(K-31333KR-0)
Kohler Co.
7
1350324-KR01-A
