Kohler C3-129, Руководство для владельцев жилья

Страница: 17 / 37

General Functions
Symptoms
Probable Causes Recommended Action
1.
2.
Seat is loose
A.
Screws and nuts are loose.
3. No water comes out
of the nozzle
Cleansing Functions
Symptoms
Probable Causes Recommended Action
4.
No water flow
5. A. The screen is clogged.
B.
Low supply pressure.
6.
7.
Water keeps on
dripping from nozzle
side holes
A.
None
Troubleshooting
This troubleshooting guide is for general aid only. A Kohler Authorized Service
Representative or qualified electrician should correct all electrical problems. For
warranty service, contact your dealer or wholesale distributor.
Funtions are not
working
A.
Power failure occurred.
B. The power cord is disconnected.
A. Seat does not detect user.
B.
Water supply stop closed.
C. Water supply screen plugged.
A.
Tighten the screws and nuts
according to the installation
guide
A.
Sit on the seat.
B. Power off and solve the
problem, power on.
C.
Clean the screen according to
the installation guide.
D.
Contact a KOHLER Service
Representative.
A.
The water supply stop is closed.
B. The seat sensor is not detecting
the user.
A.
Open the water supply stop.
B. See activating the seat
information in the
“Test the Functions” section.
The water pressure
is low
A. See the “Clean the Screen”
section.
B.
Increase the pressure.
Water stops flowing
from the spray wand
before I am finished
cleaning
A. One minute after pressing one
A.
This is to prevent the unit inside
part being over pressured.
C. Power cord suffers electricity
A.
Wait until the power is restored.
B. Insert the power cord into an
electrical outlet.
C. Press the “Reset” icon on the
plug.
D. You have to sit inside the seat
sensing area.
E. Allow the seat to cool to room
temperature.
F.
Contact a KOHLER Service
Representative.
D. None of the above actions
correct the symptom.
A. Press the “Rear” or “Front” icon
again.
B. See activating the seat
information in the “Test the
Functions” section.
of the spray icons,
washing automatically stops.
B. The seat sensor is not detecting
the user.
leakage. Connector plug
E. Thermal protector to open
automatically to protect.
F.
None of the above actions
correct the symptom.
is not reset.
D. You have not touched the seat
sensing area.
Kohler Co. 17 1261355-T01-L