IMPORTANT INFORMATION
WARNING
:
Risk of personal injury or product damage
.
Handle with care
.
Vitreous China can break or chip if the bolts and nuts are over-tightened, or if the product is handled
carelessly.
Observe all local plumbing and building codes.
Carefully inspect the new lavatory & pedestal for any damage.
ROUGHING-IN
Ÿ
All dimensions in inches (cm). Fixture dimensions are nominal and conform to tolerances as per ASME Standard A112. 19.2M.
Ÿ
Product illustrations shown are representative only; actual products may vary.
Ÿ
Kohler reserves the right to make changes in product characteristics, packaging or availability at any time without notice.
CAUTION
: Do not use lime/cement to install the lavatory. The expansion of lime/cement due to rise in temperature may
cause the lavatory to crack or be damaged. Kohler is not responsible for any damage caused by installation with the use
BRIVE+
INSTALLATION INSTRUCTIONS
K-8703IN-1WH / K-8700IN-1
VITREOUS CHINA LAVATORY
1213118-IN01-C -1-
A
TOOLS & MATERIALS REQUIRED
Figure 1
1
2
A. Spirit Level
B
B. 10" Adjustable Wrench
ORDERING INFORMATION
Brive+ Wall-Mount Lavatory..............K-8703IN-1WH*
Brive+ Pedestal Lavatory............................K-8700IN-1*
Includes Wall-Mount Lavatory.................K-8703IN-1WH*
Includes Pedestal...................................K-8705IN*
For Wall-Mount Lavatory Installation
2-3/4" (7 cm)
19-7/16"
(49.4 cm)
8" (20.3 cm)
18-1/4"
(46.4 cm)
1-3/4"
(4.3 cm)
21-1/4"
(54 cm)
8-5/8"
(22 cm)
9-1/4"
(23.5 cm)
16"
(40.5 cm)
1/2" Cold
4" (10.2 cm)
1-1/4" (3.2 cm)
Waste Outlet
34"
(86.4 cm)
Anchor Holes
1/2" Hot
(K-8703IN-1WH*)
C
C. Hammer Drill with 14mm Drill Bit
of lime/cement.
* Available in “-0 (White)” & “-96 (Biscuit)”
2-3/4" (7 cm)
19-7/16"
(49.4 cm)
8" (20.3 cm)
18-1/4"
(46.4 cm)
1-3/4"
(4.3 cm)
21-1/4"
(54 cm)
8-5/8"
(22 cm)
9-1/4"
(23.5 cm)
16"
(40.5 cm)
1/2" Cold
4" (10.2 cm)
1-1/4" (3.2 cm)
Waste Outlet
34"
(86.4 cm)
Anchor Holes
1/2" Hot
For Pedestal Lavatory Installation
(K-8700IN-1*)
Consumer should preserve this document to order spare parts in future.
